Support for Reolink TrackMix WiFi Camera
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Custom two-part PETG mount designed to attach a security camera to a 90mm roof downpipe reusing an existing support
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 607
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
I designed a custom mount to securely position my security camera near the roof, specifically for attachment to a 90mm diameter roof downpipe gutter (adjusted to 88mm for a snug fit).
The mount consists of two parts:
1. Part 1: A simple support originally designed for a Reolink E1 Outdoor E540 camera, which I have successfully used for some time.
2. Part 2: An add-on component that works exclusively with Part 1, created to reuse the original support instead of discarding it.
Although the design could be simplified into a single smaller piece, my goal was to repurpose the existing support. Printed from PETG, the mount has been securely fixed with self-tapping screws for nearly a year, performing reliably in all conditions.