1 / 1
Black & Decker KS400E to Miele Vacuum Clip — zdjęcie 1

Black & Decker KS400E to Miele Vacuum Clip

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Connects a Black & Decker KS400E jigsaw to a Miele quick connect vacuum hose

Ocena
0 / 5
Polubienia
1
Pobrania
17
Wydruki
0
Wyświetlenia
85
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Share Alike

Note, that the Black & Decker side is quick and dirty… I eyeballed the angle, which turned out to be a bit more shallow. It is also not as long as it could be - but I wanted to spare some minutes printing time. The shoulder inside is not directly required for the function - the seal is tight any ways - but requires support while printing. You can add a chamfer instead to print without supports…

In the end, this piece sucks ;)

 

(You can also use the drawing for the Miele side and model your own device adapter - It works for the hose of a Miele S8 from around 2012)

Tagi