Ultimate Gridfinity Tiles (Press Fit + more)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The sexiest gridfinity cover tiles you'll ever see!
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 51
- Wydruki
- 1
- Wyświetlenia
- 260
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The sexiest Gridfinity tiles you'll ever lay your eyes on! Featuring:
- Satisfying press fit
- Easy lift tabs
- Classy chamfers
- Multiple sizes
- Correct orientation!
These are meant to be printed in the face down/magnet holes up orientation, which they should be in when you open them in your slicer.
Recommended material and settings:
eSun PLA+ or comparable (Bambu PLA and Polymaker PLA are good too)
Textured PEI bed
Cooling off for first 3 layers (in your filament settings if you're using Bambu slicer)
0.2mm Standard preset
Set infill to 10% Gyroid
And that's it! The infill and cooling settings are critical to avoiding warping for large sizes like 5x5. 5x5 makes a nice mousepad, by the way.
