1 / 3
Bambulab magnetic poop bin for 4x3mm magnets — zdjęcie 1
1 / 3

Bambulab magnetic poop bin for 4x3mm magnets

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Magnetic poop bin for your P1S / P1P (and maybe X1 Series) printer that takes 4 cheap 4x3mm magnets.

Ocena
5 / 5
Polubienia
10
Pobrania
58
Wydruki
1
Wyświetlenia
324
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Magnetic poop bin for your P1S / P1P (and maybe X1 Series) printer that takes 4 cheap 4x3mm magnets.

The magnets fit very tightly in a 2x2 formation, and hold onto a P1S quite well. The back wall is fairly tall and should prevent poops from flying over the top.

Printing tips

  • Print at around 0.2mm to 0.16mm layer height
  • Use variable layer height to make the magnet indents print nicer.

Shopping list

  • 4x3mm magnets (I used these) x 4
  • Some filament of your choice
  • Mole grips / pliers / hammer to get the magnets in (Optional)

 

I am aware that this is “yet another” poop bin build, but I found it easier to design my own that had some “fly over” redundancy and fit my magnets.

Tagi