1 / 3
Shelly Plus RGBW PM Din Rail Mount - three clamps — zdjęcie 1
1 / 3

Shelly Plus RGBW PM Din Rail Mount - three clamps

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Shelly Plus RGBW PM holder for 35mm Din Rails with three clamps to hold the shelly in place

Ocena
0 / 5
Polubienia
7
Pobrania
122
Wydruki
0
Wyświetlenia
418
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution

I’ve created a custom remix of my own model, originally based on a design by Thingiverse user boxter. This version is designed to securely hold a Shelly Plus RGBW PM on a 35mm DIN rail.

I’m using this model to mount the Shelly in our camper van. The addition of a third clamp improves stability, ensuring the Shelly stays firmly in the frame even on bumpy roads. To prevent the components from sliding along the rail, I’ve also added stop blocks. One stop block is positioned next to the model and touches only the clamp near the rail without interfering with the rest of the design. As shown in the last picture, I trimmed one clamp to accommodate this setup.

Tagi