AAA 6 battery case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
AAA 6 battery case, half open, with unscrewable lid.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 135
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
AAA 6 battery case:
- half open to see what is inside,
- with unscrewable lid, which can by also attachetd on bottom to left case open.
Version 3 of lid have hole, which will force additional walls in the slicer, which should increase torsional strength. The thread is reduced by -0.1mm on the top, bottom and outer walls.
Version 2 of lid have small hole, which will force additional walls in the slicer, which should increase torsional strength. Of course, you can use a stronger material than PLA and increase the number of walls and density of infill.