1 / 1
35mm Film Sprocket for Lego Technic Axles — zdjęcie 1

35mm Film Sprocket for Lego Technic Axles

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This 8 tooth sprocket is designed to carry 35mm Photographic Film. The central hole fits a standard Lego Technic axle.

Ocena
0 / 5
Polubienia
15
Pobrania
83
Wydruki
0
Wyświetlenia
380
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

This model was designed for use in Lego-based film photography projects. 

Sizing:
The teeth are the correct pitch for 35mm film with standard sprocket holes. 

The central hole fits Lego Technic axles, and is sized to slide on the axle but have almost zero play (material and resolution dependent). 

The sprocket width is set to the same width as a standard full Technic bushing.

Problems or Changes?
If you would like me to make changes to this part, correct/improve something, or create versions with different numbers of teeth, please ask. 

 

Printing guide:
The test model, pictured, was printed from gcode generated by PrusaSlicer, on a Sovol SV06+ using PETG filament and the following settings: 

Nozzle: 0.4mm, 245ºC all layers.

Bed: 85ºC first layer, 75ºC other layers.

Layers: 0.2mm first layer, 0.15 other layers.

Infill: 15% Gyroid

Supports: No needed.

Brim: Yes! [Important]. Outer only, 5mm, 0.1 separation.

 

Thanks: 
The tooth pitch and shape data was helped along by this model: https://www.printables.com/model/179917-35mm-film-sprocket-drive-parametric 

 

Tagi