1 / 6
Meshtastic RAK19001 Base Board - RAK13800 Ethernet Module - RAK19018 PoE module Base Plate - Gratury Junction Box, IP67 Waterproof Plastic Enclosure 220×170×110mm (8.6"×6.7"×4.3") — zdjęcie 1
1 / 6

Meshtastic RAK19001 Base Board - RAK13800 Ethernet Module - RAK19018 PoE module Base Plate - Gratury Junction Box, IP67 Waterproof Plastic Enclosure 220×170×110mm (8.6"×6.7"×4.3")

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Made a base mounting plate that fits in a Gratury IP67 Junction Box. Printed in Bambu PETG Basic

Ocena
0 / 5
Polubienia
33
Pobrania
124
Wydruki
0
Wyświetlenia
1986
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial

Note: The Ethernet Module PINs didnt land where I expected based on the model, so I used a knife to cut the lower two standoffs. I attempted to replicate this in the .STEP but its not tested and certainly would be below the expected tolerances for the heatsets. It worked well enough for me tho in real life :)

 

Suggest printing in something higher temperature tolerance like PETG, or ASA/ABS. 

I did 3 walls, 15% gyroid infill and printed at 50% speed overnight ~5hrs (My P1S handled the bridges just fine in PLA at 100% when testing, slower speed may not have been needed but worked for PETG)

The holes are not at any particular spacing but will accept the same heat set inserts I used in the standoffs.

 

Meshtastic BOM

From RAK 

From Rokland - Antenna recommended by Meshtastic

From Amazon (I'm sure you can get cheaper stuff from AliExpress or others)

Tagi