1 / 1
UK Class 47 Diesel Locomotive Brake Handle — zdjęcie 1

UK Class 47 Diesel Locomotive Brake Handle

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

UK Class 47 Diesel Locomotive Brake Handle for use with 6mm splined shaft potentiometer such as found on macropads

Ocena
0 / 5
Polubienia
2
Pobrania
18
Wydruki
0
Wyświetlenia
132
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Public Domain

A design based on the UK class 47 brake handle to be used on a 6mm splined shaft potentiometer / rotary encoder such as found on the cheap chinesium macropads that can be bought on sites such as AliExpress for cheap.
Rather than pay silly prices for full size controllers, I designed this to replicate the type of brake lever, found on the class 47 UK diesel locos. It can be friction fit to replace the knob one of the potentiometers to give a bit of a realism feel, while keeping things in keeping with the size of these macro pads.

Printed with PLA at a layer size of 0.2mm - 0.4mm, about 25% infill, with whatever support works best for your set up. Just remember to put a support blocker where the pot splines go. But whatever settings on your 3D printer work best for you, go with them. :)