Endstop Ender 2 Pro
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Offseted mount for z endstop, because the metal thing of the endstop borke
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 170
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
Hardware:
-2x M3x8mm (or 2x M3x8mm)
-Original M5 mounting screw
-Original endstop pcb
The metal tab of the endstop broke , and in homing noting was gona press the red button without the metal thing.
And i didn't want to buy an new endstop +pcb, or to resolder a new clicky button, i wanted to reuse the existing pcb.
I printed the part in PLA few prototipes , and they were perfect in that material too , but i printed the final part in ABS on a Voron printer at 0.2 layer height, 5 walls 5 top, 5 bottom and 40% infil.
I left some space for the right screw to be mounted from the front and back (i had 1 screw with the head bigger and it was hiting the Pcb Conector ),and i mounted just 1 screw from the back , just to act as a guide pin , and 1 screw to hold the pcb.
The mount had very little play
But the pcb on the mount had no play