Headphone armhanger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Made this headphone hanger for the lamp next to my bed.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 48
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution — Share Alike
Made this headphone hanger for the lamp next to my bed.
**You need to print the parts seperatly, and therefor cannot print the stl directly.**
It is design to be able to go around a pole that is a maximum of **1.9cm** in diameter.
The angle of the holder is made for my lamp, but will probably work for most things, like a headphone lamp hanger / mount. If you with to have another angle, you can edit the files yourself, or leave a comment (then I maybe make another file).
**The .3mf file is from Bambu Studio, and will maybe cause problems in other slicers, especially as scarf seam is on**
I did not end up using the clip insert, but you may have a different experience.
EDIT: The small arm broke of due to the clip breaking. I think using the clip insert will help with distributing the load on both parts of the clip.
All the files are exported from Fusion360. I cannot test if the SketchUp and Inventer files work.
Print Settings
Printer Brand:
Bambulabs
Printer:
Bambu X1C
**Rafts:**
No
Supports:
Yes
**Resolution:**
0.16mm
Filament: Bambu PLA or PLA-CF