Wall clamp - clamp for organizing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
If you want to organize your gloves, beanies or anything of that nature, this is the clamp. If the clamp if not strong…
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 32
- Wydruki
- 2
- Wyświetlenia
- 164
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
If you want to organize your gloves, beanies or anything of that nature, this is the clamp.
If the clamp if not strong enough, I would recommend downloading the fusion file and changing the thickness of the "hinge" and/or the spring.
A known issue is the hinges breaking. I have not used TPU because I did not have any. I will maybe in the future update the clamp with a TPU version.
Print Settings
Printer Brand:
Creality
Printer:
Ender-5 Plus
Yes
Supports:
No
0.15mm
Infill:
60%
Little tedious to get all the brim off. Took a razor knife and just all the small little brim parts of and a little 400 grid sandpaper for the final touch.
How I Designed This
Trial and error
I have gone through about 9 different prints of this. Either it was too hard to open, too weak to close or cracked.
This design is just a qualified guess at what I think works good
Category: Organization