1 / 1
shorter hanger - to fit on more 3D printer beds (sometimes diagonally)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simply cleaned-up and shortened the long piece to remove some scan artifacts and make it fit my door.Slice it at .24mm…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 56
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Share Alike
Simply cleaned-up and shortened the long piece to remove some scan artifacts and make it fit my door. Slice it at .24mm layer height to avoid other surface artifacts from original post. You'll still need to print the other two pieces from the source design. I used IIID Max PLA+ and printed at 200mm/s at 210ºC with 50ºC bed. Have fun and Happy Holidays!
Category: Art