Jar Lid Holder – Parametric 3D Model for Canning & Recycled Jars
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Parameterized jar lid holder with a hexagonal lattice base for drainage. Includes presets for 75 mm and 82 mm lids.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 178
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Share Alike
This jar lid holder is for organizing canning lids or lids from recycled jars, such as those from peanut butter or pasta sauce. The holder has a hexagonal lattice base, which prevents water accumulation by allowing moisture to drain if the lids are wet when stored. The design is customizable with adjustable parameters to suit your needs.
Features
- Hexagonal lattice base: Allows water to drain and keeps lids dry.
- Customizable dimensions: Adjustable parameters accommodate various lid sizes.
- Preset sizes – 3mf files for common lid diameters:
- 82 mm: Fits Adams 16 oz peanut butter jar lids.
- 75 mm: Fits Classico 24 oz pasta sauce jar lids.
Customization instructions
The parametric design is easy to modify in Autodesk Fusion 360. Use the provided .f3d file to adjust the following parameters, which are marked as "favorites":
- jar_lid_diameter: The diameter of the jar lids the holder will accommodate.
- height: The height of the holder for storing more or fewer lids.
- hex_radius: The radius (center to point) of the hexagons in the base lattice.
- hex_d_spacing: The spacing between adjacent hexagons in the lattice.
To change the parameters:
- Open the .f3d file in Autodesk Fusion 360.
- Go to the Parameters menu by selecting Modify > Change Parameters from the top menu.
- Locate the "Favorites" section to find the editable parameters.
- Adjust the values as needed. The model will update automatically.
- Export the customized design as an STL or 3MF file for printing.