Attack on Titan Eren
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Attacco dei Giganti
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 106
- Wydruki
- 1
- Wyświetlenia
- 740
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — NoDerivatives
Un potente basso rilievo che raffigura Eren Jaeger nella sua forma di Titano, tratto dall’epica serie L’Attacco dei Giganti (Attack on Titan). Con dettagli straordinari che mettono in evidenza i muscoli e l’energia bruciante del personaggio, questo pezzo è un tributo perfetto per i fan dell’anime e del manga.
A powerful bas-relief featuring Eren Jaeger in his Titan form, inspired by the epic series Attack on Titan (Shingeki no Kyojin). With incredible details showcasing the muscles and burning energy of the character, this piece is a perfect tribute for fans of the anime and manga.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 134.44x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used:
PLA Black Transmission Distance: 0.3
PLA White Transmission Distance: 5
This print uses 2 unique filaments
Swap Instructions:
Start with Black
Border Only Colors from here until the end.
At layer #20 (1.68mm) swap to White for the rest.