Out-of-Production CCBS/Bionicle/Hero Factory Bone Elements
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D-printable recreations of the "Bone" elements of LEGO's Creature and Character Building System
- Ocena
- 5 / 5
- Polubienia
- 75
- Pobrania
- 604
- Wydruki
- 1
- Wyświetlenia
- 2429
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Noncommercial
This set of files includes 3D-printable recreations of most Creature-And-Character-Building-System frame/"bone" elements produced by Lego from 2011-2016 for the Heo Factory and g2 Bionicle lines.
All elements are compatible with one another, as well as actual lego elements. All parts have also been tested and oriented for what I believe gives the best results.
Elements recreated in this collection:
- 90616 Hero Factory Arm/Leg, Modified with Ball Joint, Ball Socket and Pin hole
- 90615 Hero Factory Arm/Leg, Modified with Ball Joint, Ball Socket and 2 Pin holes
- 90613 Hero Factory Arm/Leg, Modified with Ball Joint, Ball Socket and 4 Pin holes
- 90612 Hero Factory Arm/Leg, Modified with Ball Joint, Socket and Short
- 90611 Hero Factory Arm/Leg, Modified with Ball Joint on Axel, Ball Socket and Short
- 90608 Hero Factory Arm/Leg, Modified with Ball Joint on Axel, Ball Socket and pin hole
- 90607 Hero Factory Arm/Leg, Modified with Ball Joint on Axel, Ball Socket and 2 pin holes
- 90605 Hero Factory Arm/Leg, Modified with Ball Joint on Axel, Ball Sockett and 4 pin holes
- 98565 Hero Factory Arm/Leg Extender, Modified with Ball Sockets
- 90622 Hero Factory Arm, Modified with Ball Sockets
- 98590 Hero Factory Torso, Extra Small with 5 Ball Joint
- 90625 Hero Factory Torso, Medium with 9 Ball Joint
- 90623 Hero Factory Torso, Large with 9 Ball Joint
- 24189 Large Figure Torso Skeletal Connector, Modified with 2 Ball Joint
- 24190 Large Figure Torso Skeletal, Modified with Ball Joint and Gear Hips/Waist/Bottom
- 24010 Large Torso Skeletal with T-Shaped Liftarm and 3 Ball Joint
- 98577 Technic, Liftarm Ball Joint Middle 1x3
- 90630 Technic, Pin Connector Perpendicular 3L with 2 Pins and 2 Ball Joints
- 90634 Technic, Pin Connector Perpendicular 3L with 2 Pins and 2 Ball Joints on Axle
Recommend printing with PETG, 0.1 mm layer height, 100% infill, and Organic supports.
If you enjoy these files, I strongly recommend you check out my recreation of other CCBS elements! https://www.printables.com/model/1142685-out-of-production-ccbs-armor-elements