3M floss pick dispenser box (no spring required)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modified version of an existing design, but was about 2.5mm too short for 3M floss picks. Also added guides.
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 143
- Wydruki
- 0
- Wyświetlenia
- 872
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Creative Commons — Attribution
Compared to other floss picks, 3M ones are a bit longer, so I made the whole case taller. Also added guides inside to prevent picks from moving too much, and adjusted position and thickness of the spring clip to better push picks.
Please pull the button all the way down before pushing another floss pick out to prevent from hooking at the floss part. Floss might be damaged in the process.
If you want the button textured, adjust you're favored slicer to have 0 bottom shell layers and pick whatever infill pattern and density you'd like.
If you find that the spring is losing its flexibility a bit due to long-term deformation, use a heat gun or hair dryer, heat it up for less than 10 seconds and reshape it before it cools down entirely. That is kinda the limit of plastics honestly, and maybe it isn't worth it to make a spring mechanism just to push the sticks within such a small space.