1 / 2
mead horn stand (120mm x 60mm footprint)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
a simple stand for mid sized mead horns. should fit anything between 250 and 800 ml.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 239
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Costume Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (11)Powiązane
A mead horn stand with simple geometry. The wider side fits 60mm wide horns (the open side of your horn should have a 60mm diameter in its “wider” third).
original model by me. Pictured prototype printed on a (kind of uppety) Sovol SV07 Plus with SUNLU meta PLA white at 190 C.
use gyroid infill with 10 to 15%
