HBM-23.5 - Reliability Mods for the HBM-23
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These files contain all the mods I made to my HBM-23 to make it reliably dump 40 round box mags.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 292
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
The HBM-23 is a great blaster but I really had a hard time getting it to fire reliably. After doing a bunch of troubleshooting, I've made a number of modifications to mine to make it shoot much better. There's been a number of changes but the major ones that affect reliability are:
- Lengthening the breech to accommodate longer links in order to use links that fully cover the rubber tips of darts. This single change required remodeling a significant portion of the blaster
- Removing the back wall from the roof and lengthening the dart pusher in order to utilize the dampening washer of the solenoid
- Adding an access port to the sprocket holder in order to tighten the sprocket grub screw
Note that everything was designed to be used with the bill-of-materials that the original HBM-23 used. The ONLY exception is that the box mag needs two M2 screws ~10mm in length… this is the attach the lever to the box mag.