Luffy e la ciurma di Cappello di Paglia
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Un tributo all'iconico universo di One Piece, questo basso rilievo raffigura la silhouette di Monkey D. Luffy
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 115
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — NoDerivatives
Un tributo all'iconico universo di One Piece, questo basso rilievo raffigura la silhouette di Monkey D. Luffy con il suo caratteristico cappello di paglia. All'interno della figura di Luffy troviamo la bandiera pirata della sua ciurma e le silhouette dei suoi compagni principali: Zoro, Sanji e Usopp, simboli di avventura e amicizia.
A tribute to the iconic universe of One Piece, this bas-relief depicts the silhouette of Monkey D. Luffy with his trademark straw hat. Inside Luffy's figure, the pirate flag of his crew is displayed along with the silhouettes of his key companions: Zoro, Sanji, and Usopp, symbols of adventure and friendship.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 112.71x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used:
PLA Black Transmission Distance: 0.3
PLA White Transmission Distance: 5
This print uses 2 unique filaments
Swap Instructions:
Start with Black
Border Only Colors from here until the end.
At layer #10 (0.88mm) swap to White for the rest.