1 / 1
Movable puppet eye for 20 und 25mm glass cabochon — zdjęcie 1

Movable puppet eye for 20 und 25mm glass cabochon

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

These are my 3D models for movable puppet eyes with inserts for a 20 or 25mm glass cabochon.

Ocena
0 / 5
Polubienia
45
Pobrania
193
Wydruki
1
Wyświetlenia
1176
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

These are my 3D models for movable puppet eyes with glass cabochon inserts. The eye was designed for a FDM printer.

The eye is modeled as a replacement for a ping pong ball with a 4cm diameter and it does fit in the other backplates and movable eyelids I made. You can find the other parts for the movable eyelids at: https://www.printables.com/model/95920-movable-puppet-eye-and-eyelid

animatronic_puppet_eye_flexring3.stl fits best in  animatronic_puppet_eye_insert_25mm_nolever.stl.

The ring that holds the eye in the backplate is designed to be printed with a flexible filament like TPU - it will not fit if you print it with a non-flexible filament. 

Tagi