Prusa MK2 MK2S MK3 Web Cam Bracket with Tripod Style Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed this some time ago but here it is now.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 123
- Wydruki
- 0
- Wyświetlenia
- 1084
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Designed this some time ago but here it is now.
A Web cam bracket for the Prusa MK2 or MK2S with a (tripod style) mount and bolt.
I changed my layer height from 0.2 on the bolt when it got to the thread and printed at 0.1
The large screw / bolt is handy as you can do it up with one finger.
The bracket screws on to the right hand side screw under neath the heat bed. The notch in the bracket fits over the arm of the heat bed support.
Update 15-07-2018
I have now added a version for the MK3 as well so please make sure you Download the correct STL file for your printer.
The MK3 Bracket pushes on to the bed support then fastens in place with a small cable tie.
The MK2 Bracket pushes on to the bed support then screws in to place with the existing screw.