1 / 1
Holder for resin chess pieces silicone molds
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple holder to hold the molds for basin chess piece molds while the resin cures
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 107
- Wydruki
- 0
- Wyświetlenia
- 343
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (16)Powiązane
A simple holder to hold your chess pieces silicone molds while the resin cures.
Print the top with the legs up, the labels should be small enough to not require supports, print the bottom with the recessed holes for the legs up.
I used 20% grid infill, 3 perimeters, 4 top/bottom layers and its been fine so far.
