1 / 2
16 Oz Adapter for Yeti 12 Oz Colster Can Cooler - Optimized Threads
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter to fit a 16 Oz Can in a Yeti 12 Oz Colster can cooler, with optimized threads.
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 98
- Wydruki
- 2
- Wyświetlenia
- 533
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 2) (Komentarze: 2)Remiksy (0)Kolekcje (28)Powiązane
An adapter to fit a 16 Oz can in a 12 Oz Yeti Colster can cooler (https://www.yeti.com/drinkware/can-insulators/colster-12oz.html)
- Optimized threads
- It works with the existing top gasket for a perfect can fit
- Grooved shape for a nice three finger grip while enjoying your beverage
I tried a few similar adapters already posted on Printables but the threads did not fit well on my Colster can cooler (circa 2022) so designed a new one; Yeti might have altered the thread geometry at some point in time? If you have the same problem, give this one a try.
Print recommendations:
- PETG material
- 0.4 mm nozzle, 0.2 layers, 15% fill worked fine
- New scarf seam (Prusa Slicer v2.9+) is recommended