Snow globe for Oui yogurt glass

Print this base to make a homemade snow globe! Print in multiple colors or paint after printing to customize the snow globe to your liking. Follow the instructions below to make your very own:

-Optionally spray the print with a filler/primer before painting, to make it easier for the acrylic paints to cover the print

-Once the paint dries, spray the print with a clear polyurethane, to make sure the print is waterproof

-Make a 2 to 1 mixture of distilled water to clear Elmer's glue. Gently stir the mixture and pour it into the empty and cleaned Oui yogurt glass. Leave approximately ¼" of space with no liquid

-Add as much glitter to the liquid as you would like. Larger glitter flakes tend to work better than a glitter powder

-Finally, apply a generous amount of silicone adhesive in the channel of the 3D print where the oui glass snaps onto. Submerge the Christmas tree into the liquid of the Oui glass, while the glass opening is facing up

-Don't let the liquid touch the silicone adhesive for many hours while it dries. It is best to keep the glass and print clamped together while the silicone adhesive is drying.

Printed in PLA on a Elegoo Neptune 4, with 15% infill on a 0.2mm nozzle.

Here are links for the products I used to complete my snow globe:

-Spray filler/primer: https://www.amazon.com/Rust-Oleum-249279-Automotive-11-Ounce-Filler/dp/B003CT4AM0

-Acrylic paints: https://www.amazon.com/24-Color-Acrylic-Paint-Set-Brushes/dp/B08QNJ7KSF

-Polyurethane spray: https://www.amazon.com/Rust-Oleum-249117-Painters-Purpose-12-Ounce/dp/B002BWOS5I

-Distilled water: https://www.amazon.com/Pure-Life-Distilled-Water-Gallon/dp/B0BFK1C5LB

-Clear Elmer's glue: https://www.amazon.com/Elmers-Liquid-School-Washable-Ounces/dp/B001G9EBDG?th=1

-Glitter: https://www.michaels.com/product/bling-star-specialty-polyester-glitter-by-recollections-10624750

-Silicone adhesive: https://www.amazon.com/GE-GE284-Silicone-Kitchen-Squeeze/dp/B000PSE46S

-Oui yogurt: https://www.ouibyyoplait.com/products