The $100 DIY Temp Controlled and Filtered Printer Enclosure Upgrade
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Elevate your 3D prints with a temperature controlled and air filtered enclosure without breaking the bank!
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 273
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Introduction:
Imagine transforming your 3D printing experience with a DIY enclosure upgrade that costs just $100. This transforms your enclosure into a temperature-controlled and air-filtered system, ensuring your prints come out perfect every time, and your lungs breath cleaner air. Whether you're a seasoned maker or a curious beginner, this project will walk you through the steps to create a professional-grade enclosure without breaking the bank. Ready to elevate your 3D printing game?
How to start the project:
- Download the models here and print them in PLA¹ (other materials may work, but the fit may be off)
- Go to arcanelayers.com to purchase the required hardware or find equivalents.
- Follow the tutorial at arcanelayers.com for a step-by-step guide on how to do this project.
Print Settings:
- Layer Height: 0.2mm
- Infill: 15%
- Supports: None
- Material: PLA recommended, this model is designed for a tight fit, other materials may not work.
This post contains affiliate links, any link marked with ¹ is an affiliate link. Using these links helps support my work!