Zesty Nimble Tank Mod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A remix of a remix! A friend of mine is getting the Zesty Nimble, and I thought since I already had this design fresh…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 216
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
A remix of a remix!
A friend of mine is getting the Zesty Nimble, and I thought since I already had this design fresh in my mind that I would adapt it to the Nimble. I have no idea if this mount really works or not, so if anyone is brave enough to try it please let me know! From the design it seems like everything should work just fine.
I adapted the groove mount to fit the standard groove mount adapter for the Nimble (which I will include here), and then used M3 nut capture for the 2 M3 x 40 screws.
This mod is compatible with the ABL mounts from my other remix, as well as any of the cooling fan adapters (Prusa, etc.)
5/25: Realized the nut capture was probably off by a bit (wrong clearances, and would prevent the two halves from joining). I think I have that fixed now!
Category: 3D Printer Parts