1 / 1
Voronoi Heart-ception (parametric)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Share Alike
Yo can put your own text on the inner heart by modifying the two sketches (one each side) in fusion360. You can also easily change the scale of the inner heart compared to the outer one with a parameter.
Printing Information:
- Use tree support to support the voronoi structure. You can get away by only supporting the critical regions.
- Use a brim, since its contact surface with the printbed isn't all that much.
- By splitting the model to its pieces you can change the infil of the inner heart only to 5% to save on filament