1 / 5
Walimex / Elgato Multi Mount Flex Kit
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Walimex / Elgato Flex Arm Support
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 273
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Public Domain
I use a Walimex Wall Mount for my Elgato Keylight Air + top camera. I've always struggled to fit the camera cleanly & had several weird looking setups around it. Since getting a 3D Printer and learning CAD, i came up with this. It is pretty specific and might not be used often, still i wanted to share if anyone comes across this.
Important:
- I used 1mm thick rubber that I glued on in the cut out circles that get attached to the arm. (picture with the green markings).
- 4x M4x30 bolts w/ nuts
- Elgato Mount = Printed on the side, support under the mout
- Support = Printed normal facing up
- Printed with PETG, 50% infill
The Walimex Mount: https://www.amazon.de/gp/product/B00319VSBW/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1