6mm scale Industrial - Containers - BattleTech Compatible
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Original work designed to be compatible with BattleTech and other 6mm Games.
- Ocena
- 5 / 5
- Polubienia
- 34
- Pobrania
- 288
- Wydruki
- 1
- Wyświetlenia
- 982
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Your futuristic war machines shouldn't be slogging through swamps and deserts to find their foes. Take it to the streets with the Smelly Old Gamer's line of buildings.
My own original work designed to be compatible with BattleTech and other 6mm Games. These are two pieces that model sci-fi style shipping containers. Two STLs are included:
- Container Scatter Plate.stl - A hex with three scattered cubic containers. Good for scatter terrain or maybe rough terrain in an industrial area.
- Container Stack PlateSimple - A stack of cubic shipping containers that good be used for a level one hill or other LOS blocking terrain.
Both are on hex sized bases. 6mm infantry figure shown for scale.
For all of my buildings, I recommend 1.2mm wall thickness. I design them to be “acceptable” at .2mm layer height for FDM printers.
This shouldn't require any supports and even a brim shouldn't be needed.