Snowman with screwable hat and hidden compartment (Key-stash; GEOCACHING...)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Snowman statue with hidden compartment (18x118mm). Just unscrew the hat! ;) There're two versions of hat.
- Ocena
- 5 / 5
- Polubienia
- 75
- Pobrania
- 499
- Wydruki
- 6
- Wyświetlenia
- 2672
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution — Noncommercial
Snowman statue with hidden compartment (18x118mm). Just unscrew the hat! ;)
There're two versions of hat. File "hang_hat" contains model of the hat with hole at the top of the part, so you can piece of string to hang snowman somewhere. File "hat" contains fully-closed hat at the top. Both versions work like screwable lid for the compartment.
Total height: 131mm
Print instructions
5% infil with 2 perimeters will suffice. No support needed ;)
For buttons and eyes take piece of 1.75mm black filament. Heat it on one end and squeeze it flat! Then just glue it on its place.