1 / 2
Prusa I3 MK3S+ Mosquito Upgrade Extruder Body and Cover as Received from Slice Engineering — zdjęcie 1
1 / 2

Prusa I3 MK3S+ Mosquito Upgrade Extruder Body and Cover as Received from Slice Engineering

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Body and cover have been modified, just above the heater block, to duplicate ASA printed parts as received from Slice.

Ocena
0 / 5
Polubienia
6
Pobrania
59
Wydruki
0
Wyświetlenia
255
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

The ASA printed parts I received from Slice Engineering, with the Prusa I3 MK3S+ Mosquito Upgrade kit, are slightly different from the original parts, as designed by WickedTwister. The rectangular opening, just above the heater block, where the heat break passes through the extruder body and cover, has been modified to be a more circular opening than a rectangular one. This removes material that when printing higher temperature materials, or after extended use, can become distorted and deformed. This doesn't appear to be an issue that is likely to cause problems, I simply wanted the option to print the parts exactly the same as what I received from Slice Engineering. 

Tagi