Volvo EX90 Storage Bin
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A storage bin for the empty area between the two front seats
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 160
- Wydruki
- 1
- Wyświetlenia
- 1300
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
UPDATE: 1/2/2026 Added v4 version (still working on v3) that replaces the cup holders with a larger empty cavity. STEP file included in case you want to add your own dividers.
UPDATE: 3/9/2025 Added v2 version that slopes the back of the model so that it doesn't waste as much room but, in exchange, does pull the front in by ~45mm to still fit on the print bed.
UPDATE: 1/3/2025 I widened the front a little bit for a better fit. I also removed the intents at the bottom that were intended for the Velcro pads. The printer's bridging made it look pretty awful.
There is a rather large empty storage area between the two front seats. I wanted some more cup holders so I designed a storage bin for this area. There are some additional storage slots for trash, napkins, etc. I would recommend adding the rough side of a few Velcro strips to the bottom (pointing down so they contact the carpet) to keep it from shifting around during driving.
Recommended to print in 0.2 resolution, no supports needed.