Ryobi PBP005 4ah Battery Shoe
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Shoe to extend the footprint of the PBP005 batteries so some tools can stand up on the bench.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 60
- Wydruki
- 0
- Wyświetlenia
- 331
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Inspired by @JarodCanMakeI_290807's version, I decided to design my own that didn't require the velcro strap. As he mentions, the Ryobi brad nailer can't be stood up on the batteries without adding something to increase the footprint beyond the center of gravity.
The one pictured has little bosses on the inside that line up with the screw counterbored in the battery and lets it snap on. Be advised, once it snaps on, it's very much on! I tried to pull this one off, but I think I would have to break it. For this reason, I am also including one without the bosses which can be attached with a layer of double sided tape in the bottom. This is probably how I will print my remaining ones just in case I ever need to remove them.
These are designed to fit the PBP005 4ah batteries. I haven't tried it on the HP version yet, but I think they are the same. If not I will update this post.
I suggest 3 walls and 15% gyroid infill.
EDIT:
I have added a version with thee extended “toe” on the opposite end. This works well on the barrel grip Jigsaw (PSBJS01B). This version may work on some other tools as well.
I have also tested the version without the internal bosses and find that it's snug enough to stay in place without the need for any tape, yet it can be pulled off when needed.