1 / 3
Darts Display Box
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
This is just a dispaly box/chest for 3 darts. Unfortunately the darts aren't held in place, so they rattle around, if the box is not transported carefully.
Print Settings
Printer:
Anycubic i3 Mega
Resolution:
0.2mmm
Infill:
25%
Filament:
Anycubic PETG black
Notes:
Fuzzy Skin (Outside only) activated
Fuzzy Skin Thickness: 0.2mm
Fuzzy Skin Point Distance: 0.2mm
Post-Printing ===============
Connect the hinges of the lid and box with a toothpick. Pushing it in from the outside (with the pointy end first) worked best for me.
I added foam padding to the inside of the lid and bottom of the box to hide the ugly surface of my old FDM-printer.