Under Cabinet Speaker Mounts - Suspended Mount for PreSonus Eris E3.5
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Under Cabinet Speaker Mounts - Designed to suspend speakers with straps or hook & loop fasteners for vibration isolation
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 97
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial
Under Cabinet Speaker Mounts
Specifically fits the PreSonus Eris E3.5.
Under Cabinet Speaker Mounts - Designed to suspend speakers with straps or hook & loop fasteners for vibration isolation.
The model is designed in two interlocking pieces to allow printing on smaller beds.
Once installed, the speaker can be mounted by suspending it via hook & loop or other strapping that is fed through slots. The straps can be oriented in either direction.
Pulling too hard on the initial mounting may break the slots holding the straps. Be gentle. :)
The screw holes are in each corner to minimize drooping. Mine were printed out of PETG and have been installed for 3+ years and still going strong. :)