Work Sharp WS3000 sharpening platform
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a platform for the Work Sharp 3000 to sharpen larger blades
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 87
- Wydruki
- 1
- Wyświetlenia
- 466
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hardware needed:
(2) ¼"-20 X5/8" machine screws
(2) ¼" washers
(2) ¼"-20 square nuts
(4) 4mm x 18mm bolts with nuts
(4) 4mm knurled threaded insert nuts
There are 3 files so far. One does not have a lip and allows you to adjust the platform level with the glass plate. The other 2 have a lip(1 mm and 2 mm thick) to be more like the original if you don't care if it is even with the glass plate. Use the 4 bolts to adjust the plate to be co-planar with the glass plate and use the nut to lock the position. The fit is good enough at the ring that you really don't need the ¼"-20 bolts to hold it to the ring but is does add extra stability
I added modifiers in Prusa Slicer to make the area where the bolts hold the ¼"-20 bolts make contact with the ring solid. I printed mine with 5 perimeters and 30% infill and it is super ridged but you can print it however you want. You will probably want to print it in PETG PC-CF, ASA, or ABS.