1 / 1
Minky HH40201117M Ergo Ironing Board foot — zdjęcie 1

Minky HH40201117M Ergo Ironing Board foot

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replacement foot for Ironing board

Ocena
0 / 5
Polubienia
1
Pobrania
33
Wydruki
0
Wyświetlenia
383
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

My father in law asked me to print out replacement feet for an ironing board ordered from Amazon that came with 2 of the protective feet missing. They had tried to return the ironing board when it first arrived with one foot missing but it got lost in the post. Was refunded but then later was returned to him with 2 feet missing. They told Amazon and held onto it for them to recollect but never happened so he got me to make this rather than sending to landfill.

 

I printed in PLA with 10% infill and two perimeters, was a little over sized for the legs but a couple of laps of electrical tape on the legs made for a snug fit. Don't have any pictures of these but if I remember I'll take some next time I'm at his house, picture here is photo of original feet on amazon as I can't publish without a photo.

Printed perfectly without supports with the closed end at the top, but I did use a brim. 3mf file is just the export from fusion360 so no settings enclosed, and the print is at 0,0,0 when imported so will need to be placed in the printing area. Auto placement should do it for you.

Tagi