Panda Touch Bambu Lab P1S P1P replaces the original display
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Panda Touch P1S P1P replaces the original display
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 77
- Wydruki
- 0
- Wyświetlenia
- 987
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
The Panda Touch display holder is mounted in place of the old display. The holder itself is the size and shape of the worn display, it is mounted in the housing in the same way as the old display.
There are 2 options for running the USB cable to the display.
The first is the easiest, the holder has a hole designed for inserting the cable and inserting it through the factory hole at the top of the printer, on the right side. The cable remains outside.

The second is a bit more complicated, you need to dismantle the plastic part of the printer housing and unscrew the plate with the USB socket inside.
But before you start doing this, make sure that you have a USB C cable with a USB C plug with a thickness of maximum 4.8 mm. I managed to find such a ready-made cable, you can try cutting off the rubber cover of the plug, before you start dismantling make sure that the display turns on on such a USB cable.
Be sure to remove the SD card before removing the plastic part of the housing.
After disassembly, we run the USB C cable through the hole where the cable from the old display went. The excess cable should be clipped and hidden in the gap, as shown in the photo.
In the printed model, 2 inserts should be melted. I used 2.5 inserts. You can use 3 and use the screws included with the display.
Instead of melting the inserts, you can drill holes through and use screws with nuts.




