Elegoo Neptune 4 Desk Screen Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Screen holder for EN4, thermometer, and card holder so you can see all the necessary info outside of an enclosure.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 242
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I have an enclosure for my 3D printer Elegoo Neptune 4, so my screen is inside all the time, and it is a bit difficult to use.
I designed a screen holder for the included touchscreen for the Elegoo Neptune 4, also it can hold a basic kitchen thermometer screen with an alarm, which uses a 10mm by 1.7mm round magnet. Also, it has a card holder that can help you remember which nozzle you have. I made a small hole in the enclosure for this design to function. On the back, you can store the other cards. It uses the original Elegoo Screen holder in the print to hold the screen.
I printed it without supports, but the back overhang is too steep, so it is a clever idea to force support with an organic shape. Also, it uses two small wooden screws to hold into the table I have, but with double-sided tape can be a solution.
I am also adding the Word file with the right size; you should cut the cards a bit shorter than the line marked. It can be printed in letter size.
You have both STL and STEP files available.