Macropad Vertical Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stand for 3key/1pot macropad so that the potentiometer can be used on the other axis (more realistic train power lever)
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 57
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Public Domain
This is a stand so that the 3key/1pot cheap chinesium macropad can sit vertically in it, allowing for the use of the potentiometer on the other axis to more realistically simulate a train's power handle or throttle lever. Or for whatever other needs you may have to sit one of these macropads up I guess.
Printed in PLA. Infill settings depend on how robust you want it. I'd go no lower than 15% and maybe add an extra wall for structural integrity.
Update 27/12/24:
Added stl files for 12key / 3pot macropad (approx 71mm wide x 16mm thick).
Bear in mind that this macropad is heavier so I have also put up a version that sacrifices the use of the lower row of keys for better stability (you'll have to remove the bottom row of keys and switches to use).
Also added lite versions to minimise material use / printing time but they probably wont be as stable or as robust.