Psion 5MX - Internal housing / hinge panel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An experimental and UNTESTED model of the psion's internal housing, which is prone to breaking.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 102
- Wydruki
- 0
- Wyświetlenia
- 444
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
The Psion 5MX is pretty old and has issues with the housing - the plastic typically will become brittle over time and certain notches holding the spring hinge are prone to breaking.
Hopefully when tuned/tweaked it will be possible to print it (maybe with MJF?) and be a drop in replacement to give life to broken on units.
Please keep in mind I have not printed this yet, and it would likely require many iterations to get it into a usable state.
Also - It's missing one of the spring holders on the side. It's a mirror of the existing one on the opposite site, so nothing complex, but will be required. It's something I will solve in later versions.