Replacement foot for Eureka Tagalong Highback chairs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a replacement foot for Eureka Tagalong Highback chairs. It may fit other camping chairs as well.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 77
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a replacement foot for Eureka Tagalong Highback chairs.
It may fit other camping chairs as well, but has not been tested.
The inner diameter of the foot is 16.05mm. (The 0.05 is for good luck)
I've provided some gcode files sliced for a Mk4S with the HF nozzle in TPU. At 0.28mm layer height it takesapprox. 3hr45min to print a set of 4.
The feet work great in TPU with 3 walls, I may print them solid in the future if they wear down, but so far they've been fine.
If you test them on your own camping chair be sure to let me & others know in the comment section what chair it was so we can all know what fits what.
Category: Replacement Parts