1 / 3
Top hat retainer for Landcruiser 105 arm rest tray — zdjęcie 1
1 / 3

Top hat retainer for Landcruiser 105 arm rest tray

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

If the retainer snaps off the arm rest tray, then this can hold it in from the top. Can be resized and used anywhere.

Ocena
0 / 5
Polubienia
1
Pobrania
14
Wydruki
0
Wyświetlenia
123
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Share Alike

The tray is fitted to a standard 105 landcruiser (1998).  The model can easily be modified for other applications.

The original tray locator was broken.  Previous owner had hot-glued it which failed.  Original profile was heavily tapered so a plain top hat shape fitted well.  By fastening from the top it holds the tray in.  The tray doesn't droop as the upholstery pushes up.  Hot glue could be used as a collar to retain the top hat section or it could be grooved for a clip. 

Printed on Prusa MK4S in eSun PETG, 0.2mm structural profile.  Printed with internal support.  No Chamfers or rounding.  Nominal model diameter was 11mm.  Printed at about 10.8mm.

 

Tagi