MonteCristo Memories Cigar Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
2 slot cigar case, designed for MonteCristo memories size cigars. Screw cap with Monte Cristo embossing + initials
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 140
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
This case was designed specifically to fit the MonteCristo memories cigars. Though it could easily be modified to suit all thicknesses up to ~10cm in length.
I have designed the threads to be fairly compensatory to printer with less tight tolerances to ensure the cap should not need much alteration.
Printing
I highly suggest you AVOID using supports around the threads, and ensure you ENABLE Avoid Crossing Perimeters.
You will benefit from printing these sequentially, as to achieve a better finish on circular parts - unless you have a really dialed in printer, you would likely see some artifacting.
Last note, depending on your wall thickness, you may wish to enable a full layer every X layers in your infill settings for more strength in the tube, just in case it is sat on.