Foxpup Edits
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Some improvements and additions to the Foxpup design.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 222
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I did not like how the Foxpup trigger linkage was initially connected. The original design required supports and/or compromised the trigger portion's structural integrity. Thus, I separated the design into two parts that do not require supports and are very sturdy. In this design, the original pin is reused in addition to the extra pin that is included in the Out of Darts hardware kit. If there is not an extra pin, one can be scavenged from the top slide assembly. The pins are not necessary when there are two giant bolts already holding the slide together. Additionally, I remixed the FrontBlock to have a sight.