Control Box for Wanhao Duplicator I3 v2.1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A VERY unfinished control box for the Duplicator I3 v2.1 and the BTT SKR Mini e3 v3 board.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 135
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
THIS IS NOT FINISHED. It was a draft that I never got around to finishing (although it does get the job done). If anyone wants to make changes here is the onshape link: https://cad.onshape.com/documents/e591e94511f84527c8afb89c/w/8b02ffa7858b47da8e81642a/e/150034abbcd8b10f5cea79f3
If you finally fix my design please let me know so I can print it and use it.
This box is for a standard sized printer psu and a BTT SKR mini e3 v3, as well as a generic 25amp mosfet board and an 80mm fan. It's honestly a terrible design (screw holes are the wrong size, usb cable hole doesn't line up, PSU doesn't get enough air, not enough room for cables, the list goes on and on). Plan to have some various length m3 screws and nuts.
If I ever get around to fixing it I'll make sure to update this.