1 / 2
RD6006P Case with Banana Plugs
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
RD6006 Case
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 173
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Designed for the random banana connectors i had laying around. The stem is 5.8mm wide, I made the holes 6.2mm wide. The f3d file is included if yours are different.
After printing it for the first time, the top broke of like the original version for the original creator, that was because the case warped slightly and the tolerances where VERY tight.
I have increased the size by 1.5mm in both dimensions and it fits very easyly but is still tight.
Also: The banana plugs are 19mm apart. which is the standard as far as I understand it.