Bumper DEERC H16E
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement for the Bumper of the RC-Car H16E from DEERC with increased stability
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 40
- Wydruki
- 1
- Wyświetlenia
- 243
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution
Replacement for the Bumper of the RC-Car H16E from DEERC
Mine broke so I had to design a replacement.
While doing it I also stabilized the week-point which is in transition of the actual bumper & chassis of the car by making it thicker & wider.
To further increase the strength in this area I suggest to print it standing up (which then of cause needs a lot of support) and make area completely massive (→ print it with 6 perimeters)
Update to V2:
increased the hole for the light so that the plug can pass through it and it can be mounted without the need to solder the cables.
inclueding Headlight.