PXN-CB1 button box adapter (RAM mount to VESA 100)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
VESA100 to RAM 1" adapter for PXN-CB1 simracing button box.
- Ocena
- 5 / 5
- Polubienia
- 31
- Pobrania
- 129
- Wydruki
- 1
- Wyświetlenia
- 2759
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Introduction
This is an adapter to mount the PXN-CB1 to a 8040 profile sim rig with a RAM mount. The linked RAM mount is made from black aluminium and fairly strong so the button box doesn’t shake while touching.
The links below are affiliate links and help me continuing providing designs for simracing.
PXN-CB1 Button box:
https://s.click.aliexpress.com/e/_oouqWyx
What you need:
For your convenience, Amazon and Aliexpress links are to be found below. You only need to buy once per link.
1x RAM link (25mm/1“)
https://s.click.aliexpress.com/e/_olljxYB
4x M4x16 inbus
https://s.click.aliexpress.com/e/_oCngY0F
2x M4 t-nut for 4040 profile (Nut 8)
https://s.click.aliexpress.com/e/_oCpCDtv
Instructions
1. Print the model.
2. Use the 3 screws that come with the PXN-CB1 button box to attach one end of the RAM mount to the printed model.
3. Attach the printed model with 4x M4x16mm bolts to the button box.
4. Attach the RAM mount to the 4040/4080 simrig with 2x t-nuts and 2x M4x16mm bolts.
5. Enjoy.